Dolby Laboratories ZE-200DVD Operations Instructions download pdf (Page 66)

Settings and Adjustments

Speaker Set Up

Notes

• When you set the distance, the sound cuts off for a moment.

• If each of the front or rear speakers are not placed an equal

distance from your listening position, set the distance of the

closest speaker.

• Do not place the rear speaker farther away from your listening

position than the front speakers.

pBALANCE

You can vary the balance of each speaker as follows.

Default adjustments are in the parentheses.

• FRONT (0dB)

Adjust the balance between the front left and right

speakers (-6dB [L] to +6dB [R], 0.5dB steps).

• REAR (0dB)

Adjust the balance between the rear left and right

speakers (-6dB [L] to +6dB [R], 0.5dB steps).

Note

When you select “VES A” or ”VES B” in “VIRTUAL 3D

SURROUND” in the Control Menu display, you cannot adjust

the level or the balance of the speakers except for the front

speakers.

pLEVEL

You can vary the level of each speaker as follows. The

front speaker level becomes the criterion for adjusting.

Default adjustments are in the parentheses.

• CENTER (0dB)

Adjust the level of the center speaker (-6dB to +6dB,

0.5dB steps).

• REAR (0dB)

Adjust the level of the rear speakers (-6dB to +6dB,

0.5dB steps).

• SUBWOOFER (0dB)

Adjust the level of the subwoofer (-10dB to +6dB, 0.5dB

steps).

pTEST TONE

You can hear the test tone from each speaker in sequence.

•

OFF: The test tone is not emitted from speakers.

• ON: During adjustment of “BALANCE” or “LEVEL,”

the test tone is emitted from both speakers

simultaneously.

Note

While you are playing a disc, you cannot hear the test tone.

Execute the test tone after you stop playback.

To adjust the volume of all the speakers at one

time

Use the receiver’s (amplifier’s) volume control.

To return to the default setting

Select the item, then press CLEAR.

* Rear speaker position (REAR/SIDE)

These items let you specify the location of your rear speakers for

proper implementation of “VIRTUAL REAR SHIFT” and

“VIRTUAL MULTI REAR” in the Control Menu display. Refer to

the illustration below.

• Set to “SIDE” if the location of your rear speakers corresponds

to section A.

• Set to “REAR” if the location of your rear speakers correcponds

to section B.

This setting effects only the “VIRTUAL REAR SHIFT” and

“VIRTUAL MULTI REAR” mode.

Notes

• When you select an item, the sound cuts off for a moment.

• The cut off frequency for the subwoofer is fixed at 100Hz.

• Set the subwoofer‘s cut off frequency as high as possible.

• Depending on the settings of other speakers, the subwoofer

may output excessive sound.

• If your speakers are too small to reproduce low bass

frequencies, set all speaker settings to “SMALL” and utilize a

subwoofer for low frequency sound.

pDISTANCE

You can vary the distance of each speaker as follows.

Default adjustments are in the parentheses.

• FRONT (12ft/3.6m)

Front speaker distance can be set in 1 foot/0.3 meter

steps from 4 to 50 feet/1.2 to 15.2 meters.

• CENTER (12ft/3.6m)

Center speaker distance can be set in 1 foot/0.3 meter

steps from a distance 2 feet/0.6 meter farther to the

front speaker to a distance 5 feet/1.6 meters closer to

your listening position.

• REAR (10ft/3.0m)

Rear speaker distance can be set in 1 foot/0.3 meter

steps from a distance equal to the front speaker distance

to a distance 16 feet/5 meters closer to your listening

position.

90°

20°

45°

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 83 84

Comments to this Manuals

No comments

Dolby Laboratories ZE-200DVD Operations Instructions Page 66

Comments to this Manuals

Related products and manuals for DVD players Dolby Laboratories ZE-200DVD