Dolby Laboratories ZE-200DVD Operations Instructions download pdf (Page 64)

Settings and Adjustments

Setting for the Signal to the Digital

Output

When you select “ON,” set “DOLBY DIGITAL” and

“DTS.”

Switches the methods of outputting audio signals when

you connect a digital component such as a receiver

(amplifier) having a digital connector, an audio

component having a built-in DTS decoder, a DAT or MD

via the DIGITAL OUT OPTICAL or COAXIAL connector

using an optical or coaxial digital connecting cord. For

details on the connection, see page 11.

pDOLBY DIGITAL

Selects output Dolby Digital signals via the DIGITAL OUT

OPTICAL and COAXIAL connectors. You cannot select

this item when you set “DIGITAL OUT” to “OFF.”

•

D-PCM (Downmix PCM): when you play the Dolby

Digital sound tracks, the output audio signals are mixed

down to 2 channels. With the settings of the item

“DOWNMIX” in “AUDIO SETUP,” you can select

whether the signals conform to Dolby Surround (Pro

Logic) or not.

• DOLBY DIGITAL: when the player is connected to an

audio component with a built-in Dolby Digital decoder.

Note

If the player is connected to an audio component lacking a

built-in Dolby Digital decoder, do not set “DOLBY DIGITAL”

in “AUDIO SETUP” to “DOLBY DIGITAL.” Otherwise, when

you play the Dolby Digital sound track, a loud noise or no

sound will come out from the speakers, affecting your ears or

causing the speakers to be damaged.

AUDIO SETUP

AUDIO ATT:

AUDIO FILTER:

AUDIO DRC:

TRACK SELECTION:

DOWNMIX:

DIGITAL OUT:

DOLBY DIGITAL:

DTS:

To set, press , then .

To quit, press .

OFF

SHARP

STANDARD

OFF

DOLBY SURROUND

D-PCM

OFF

ENTER

SETUP

Settings for Sound (AUDIO SETUP)

pDOWNMIX*

Switches the mixing down methods when you play a

DVD on which the sound in Dolby Digital format is

recorded.

•

DOLBY SURROUND: when the player is connected to

an audio component that conforms to Dolby Surround.

(Pro Logic)

• NORMAL: when the player is connected to a normal

audio component.

* The setting affects the following connectors:

–LINE OUT (AUDIO 1, 2) connectors

–DIGITAL OUT (OPTICAL, COAXIAL) connectors.

pDIGITAL OUT

Selects output signals via the DIGITAL OUT OPTICAL

and COAXIAL connectors.

•

ON: Normally select this position. When you select

“ON,” set “DOLBY DIGITAL” and “DTS.” For details

on setting them, see “Setting for the Signal to the Digital

Output.”

• OFF: when the player does not output the sound signals

via DIGITAL OUT OPTICAL and COAXIAL connectors,

if you select this position, the influence of the digital

circuit upon the analog one is minimum.

Notes

• When you play the sound tracks with 96 kHz sampling

frequency, the output signals from the DIGITAL OUT

(OPTICAL, COAXIAL) are converted to 48 kHz (sampling

frequency). When the signals are output from LINE OUT

(AUDIO 1, 2) connector, sampling frequency stays at 96 kHz

and the output signals are converting to analog signals.

• When you select “OFF,” You cannot set “DOLBY DIGITAL”

and “DTS.”

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 83 84

Comments to this Manuals

No comments

Dolby Laboratories ZE-200DVD Operations Instructions Page 64

Comments to this Manuals

Related products and manuals for DVD players Dolby Laboratories ZE-200DVD