Dolby Laboratories ZE-200DVD Operations Instructions download pdf (Page 63)

Settings and Adjustments

Settings for Sound (AUDIO SETUP)

AUDIO SETUP

AUDIO ATT:

AUDIO FILTER:

AUDIO DRC:

TRACK SELECTION:

DOWNMIX:

DIGITAL OUT:

To set, press , then .

To quit, press .

OFF

SHARP

STANDARD

OFF

DOLBY SURROUND

ENTER

SETUP

DOLBY DIGITAL:

DTS:

D-PCM

OFF

pAUDIO DRC (Dynamic Range Control)

Makes the sound clear with the volume turned down at

night, etc., when you play a DVD. This affects the output

from the DIGITAL OUT connectors only when “PCM” in

”DIGITAL OUT” is set to “ON,” and it affects the output

from the LINE OUT (AUDIO 1,2), and 5.1CH OUTPUT

connectors.

•

STANDARD: Normally select this position.

• TV MODE: makes the low sound clear even if you

turned the volume down, so it is good for playing at

night. It is especially recommended when you listen to

the sound using the speakers of the TV.

• WIDE RANGE: It gives you the feeling of being at a live

performance. When you use high quality speakers, it is

more effective.

Notes

• When you play DVDs without the AUDIO DRC function, there

may be no effect on the sound.

• When this item is set to “WIDE RANGE,” the sound volume

from other than the 5.1CH OUTPUT connectors may be less

than usual.

• “WIDE RANGE” cannot be selected when you have selected

“NONE” in “SIZE” under “SPEAKER SETUP.”

pTRACK SELECTION

Gives the sound track which contains the highest number

of the channels priority when you play a DVD on which

multiple audio formats are recorded. If multiple audio

channels are recorded in PCM, DTS or Dolby Digital

format, the higher-numbered channel audio recorded in

PCM, DTS or Dolby Digital format is played.

•

OFF : No priority given.

• AUTO : Priority given.

Notes

• When the player stores the settings in memory with the

Playback Memory function, the player may not give priority

even if you select “AUTO.”

• When you set this item to “AUTO,” the language may change

depending on the “AUDIO” settings in “LANGUAGE SETUP.”

The “TRACK SELECTION“ setting has higher priority than

that of “AUDIO” settings in “LANGUAGE SETUP” (page 52).

• If you set “DTS” in “AUDIO SETUP” to “OFF,” the DTS sound

track is not played even if you set this item to “AUTO” and the

highest-numbered channel audio is recorded in DTS format.

• If PCM, DTS and Dolby Digital sound tracks have the same

number of the highest channels, the player selects PCM, DTS

and Dolby Digital sound tracks, in this order.

• Depending on the DVD, the audio with priority may be

predetermined. In this case, you cannot give priority to the

DTS or Dolby Digital format by selecting “AUTO.”

Select “AUDIO SETUP” after pressing SET UP.

“AUDIO SETUP” allows you to set the sound according

to the playback conditions.

Default settings are underlined.

pAUDIO ATT (attenuation)

Selects the setting of the output from the LINE OUT

(AUDIO 1, 2) and 5.1CH OUTPUT connectors according

to the audio equipment to be connected.

•

OFF: turns off the audio attenuation.

• ON: reduces the audio output level so that no sound

distortion occurs.

Note

The setting does not affect the output from the DIGITAL OUT

OPTICAL and COAXIAL connectors.

pAUDIO FILTER

Selects the type of digital filter to reduce the noise of a

frequency higher than 22.05kHz (fs 44.1kHz), 24kHz (fs

48kHz) or 48kHz (fs 96kHz).

•

SHARP: makes the sound clear and provides smooth

sound reproduction. Normally set this position.

• SLOW: makes the sound warm and deep.

Note

Depending on the disc, the effect on the sound may be difficult to

hear.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 83 84

Comments to this Manuals

No comments

Dolby Laboratories ZE-200DVD Operations Instructions Page 63

Comments to this Manuals

Related products and manuals for DVD players Dolby Laboratories ZE-200DVD