Dolby Laboratories HT2030 User's Guide Page 12
- Page / 45
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Connections (Continued)
12
Basic TV Connections
Use one of the following connections, depending on
the capabilities of your TV.
RF coaxial connection
Connect the RF.OUT jack on the DVD+VCR to the
antenna in jack on your TV using the supplied 75-ohm
Coaxial Cable (R).
ote
If you use this connection, tune the TV to the
DVD+VCR’s RF output channel (CH 3 or 4).
How to set the DVD+VCR’s RF output channel
While the DVD+VCR is turned off,
press and hold
CHANNEL (v/V) on the front panel for about five
seconds to change the RF output channel to CH 03 or
CH 04. “RF 03” or “RF 04” will appear on the front panel
display.
Audio/Video connection
11
Connect the DVD/VCR VIDEO OUT jack on the
DVD+VCR to the video in jack on your TV using the
supplied video cable (V).
22
Connect the Left and Right DVD/VCR AUDIO OUT
jacks on the DVD+VCR to the audio left/right in
jacks on your TV (A) using the supplied audio
cables.
ote
If you use this connection, set your TV’s source selector
to VIDEO.
Optional TV Connections
otes
The S-VIDEO OUT and COMPONENT VIDEO
OUT/PROGRESSIVE SCAN connections are for DVD
playback only!
The tuner and VCR will still be output
through the RF.OUT (R) or DVD/VCR OUT (A, V)
jack.
When using the COMPONENT VIDEO OUT/PRO-
GRESSIVE SCAN jacks, set the VIDEO OUTPUT
switch to COMPONENT/PROGRESSIVE. When
using the S-VIDEO OUT jack, set the VIDEO OUT-
PUT switch to S-VIDEO.
S-Video connection
11
Connect the S-VIDEO OUT jack on the DVD+VCR
to the S-Video in jack on your TV using the supplied
S-Video cable (S).
22
Connect the Left and Right AUDIO OUT jacks on the
DVD+VCR to the audio left/right in jacks on your TV
using the supplied audio cables (A).
Component Video (Color Stream
®
) connection
11
Connect the COMPONENT VIDEO OUT jacks on
the DVD+VCR to the corresponding in jacks on
your TV using optional Y/Pb/Pr cables (C).
22
Connect the Left and Right AUDIO OUT jacks of
the DVD+VCR to the audio left/right in jacks on the
TV (A) using the supplied audio cables.
Progressive Scan (ColorStream
®
pro) connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the
DVD+VCR’s progressive scan output for the highest
possible video resolution.
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the DVD+VCR.
11
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks on the DVD+VCR to
the corresponding in jacks on your TV using option-
al Y/Pb/Pr cables (C).
22
Connect the Left and Right AUDIO OUT jacks of
the DVD+VCR to the audio left/right in jacks on
your TV (A) using the supplied audio cables.
otes
– Set “Progressive” to “On” on the DVD setup menu
when using the progressive signal (see page 23).
– Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack).
ANTENNA
INPUT
R
L
R
Y
Pb
Pr
COMPONENT VIDEO INPUT
AUDIO INPUT
L
VIDEO
INPUT
S-VIDEO
INPUT
Rear of TV
Rear of DVD+VCR
SA V C
- User's Guide 1
- Safety Precautions 2
- IMPORTANT SAFETY INSTRUCTIONS 3
- Table of Contents 4
- Getting Started 5
- Getting Started (Continued) 6
- Front Panel 7
- Front Panel Display 8
- Remote Control 9
- Rear Panel 10
- Connections 11
- Connections (Continued) 12
- Basic TV Connections 12
- Optional TV Connections 12
- Speaker System Connections 13
- Speaker Positioning 13
- Other Audio/Video (A/V) 14
- Digital Device Connections 14
- Radio Antenna Connections 14
- Setting the Output Source 15
- Amplifier Setup 16
- Amplifier Setup (Continued) 17
- On-Screen Display (OSD) 19
- On-Screen Menu System 19
- VCR Setup 19
- VCR Setup (Continued) 20
- The VCR Setup Menu 20
- Channel Selection 20
- Setting the Clock 21
- DVD Setup 22
- General Explanation 22
- On-Screen Display 22
- DVD Setup (Continued) 23
- Initial Settings 23
- VCR Operation 25
- Normal Playback 25
- Special Playback Effects 25
- VCR Operation (Continued) 26
- Normal Recording 26
- Timer Recording 26
- Tape Counter Memory Feature 30
- Additional VCR Information 30
- DVD Operation 31
- Playing a DVD 31
- General DVD Features 31
- DVD Operation (Continued) 32
- General Features (continued) 32
- MARKER SEARCH 33
- Audio CD and MP3 Operation 34
- Programmed Playback 35
- Additional DVD Information 36
- Radio Operation 37
- Presetting Radio Stations 37
- Listening to the Radio 37
- Troubleshooting 38
- Troubleshooting (Continued) 39
- Language Code List 41
- Country Code List 42
- Specifications 43
- Specifications (Continued) 44
- DVD+VCR Limited Warranty 45
- Warranty 45
Related products and manuals for DVD players Dolby Laboratories HT2030
(80 pages)© 2020, manymanuals.com. All rights reserved. | 1.233 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals