Dolby Laboratories HT2030 User's Guide download pdf (Page 20)

VCR Setup (Continued)

The VCR Setup Menu

Press MENU to display the MAIN menu.

Press

to display the VCR SETUP menu,

then press SELECT/ENTER.

The VCR SETUP menu will appear.

Press

to choose the desired option on the

VCR SETUP menu. Then press

to choose

the desired setting.

SCREEN DISPLAY

The DVD+VCR on-screen displays can be turned on or off.

 Press b/B to switch SCREEN DISPLAY between ON and

OFF.

LANGUAGE

The DVD+VCR on-screen menus can be displayed in English,

Spanish, or French.

 Press b/B to switch LANGUAGE among ENGLISH, SPAN-

ISH and FRENCH.

AUDIO MODE

The DVD+VCR has two separate audio playback systems: 1)

High-quality VHS Hi-Fi system; and 2) Standard NORMAL

mono system. The same audio is generally recorded on both

systems. The VHS Hi-Fi system plays on separate (left and

right) channels, and the NORMAL system plays monaural

sound. The normal track is always played so the cassette can

be played on a DVD+VCR that does not have VHS Hi-Fi.

 Press b/B to switch AUDIO MODE between HI-FI and

NORMAL .

BROADCAST TYPE (STEREO/SAP/MONO)

Multi-channel Television Sound (MTS) carries stereo and/or

Second Audio Program (SAP) audio signals. You only need to set

BROADCAST TYPE when both MTS stereo and SAP signals are

received. When only one of these MTS signals is received, the

DVD+VCR will automatically select the corresponding receiving

mode (Stereo or SAP) regardless of the selected position. For nor-

mal operation, the display should be in the STEREO position.

The

DVD+VCR will then record a STEREO program when available, and

only record a MONO program if the program is not in stereo.

For

weak STEREO and/or SAP broadcasts, changing the display

to MONO may give clearer sound.

 Press b/B to switch BROADCAST TYPE among STEREO,

SAP, and MONO.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Used during playback [when AUDIO MODE (HI-FI/NORMAL) is

in HI-FI position] for selecting the audio output signals from the

AUDIO OUT terminals (L ch and R ch), and RF.OUT.

This display setting should normally be left in the stereo posi-

tion, so that when a stereo tape is played, the stereo sound will

be heard through the left and right channels. If a mono tape is

played and the audio output is set to stereo, the same mono

sound will be heard from both left and right channels.

 Press b/B to switch AUDIO OUTPUT among STEREO,

LEFT, and RIGHT.

Channel Selection

The DVD+VCR is equipped with a frequency

synthesized tuner capable of receiving up to 181

channels. These include VHF channels 2-13, UHF

channels 14-69 and CATV channels 1-125.

Before you begin:



Connect the DVD+VCR to the desired type of antenna or

cable TV system, as shown on page 11.

AUTO CHANNEL PROGRAMMING

Press MENU to display the MAIN menu.

Press

to select the CHANNEL SETUP menu,

then press SELECT/ENTER.

The CHANNEL SETUP menu will appear.

Press

to choose the INPUT SELECT option,

then press

to select TUNER.

Press b/B repeatedly to switch among TUNER, LINE1

and LINE2.

Press

to choose the AUTO CHANNEL SEARCH

option, then press

to find channels.

The tuner will automatically cycle through all

available channels in the area and place them in

the tuner’s memory.

After AUTO CHANNEL SEARCH is complete,

make sure the CHANNEL SOURCE is set appro-

priately in the CHANNEL SETUP menu. Press

to choose CHANNEL SOURCE, then press

to select TV or CATV.

Remember, TV is for the over-the-air antenna

reception, and CATV is for cable or wireless cable

connection.

Press MENU to return to the TV screen.

Use CH/TRK (

) or CHANNEL (

) on the

front panel to cycle the DVD+VCR through the

channels in memory.

TO ADD OR ERASE CHANNELS FROM MEMORY

This feature allows you to add or erase channels from

memory manually.

1 Press

to choose the ADD/DEL CH option on the

CHANNEL SETUP menu. Press b/B to select a

channel to add or erase.

2 Press SELECT/ENTER to add or erase the channel.

Repeat steps 1 and 2 to add or erase channels.

3 Press MENU to return to the TV screen.

SELECT

TO EXIT PRESS

ENTER

SET CLOCK

TIMER RECORD

CHANNEL SETUP

VCR SETUP

SELECT

TO EXIT PRESS

ADJUST

SCREEN DISPLAY: ON

LANGUAGE:

AUDIO MODE:

BROADCAST TYPE:

AUDIO OUTPUT:

SET CLOCK

TIMER RECORD

CHANNEL SETUP

VCR SETUP

SELECT

TO EXIT PRESS

ENTER

AUTO CHANNEL SEARCH

CHANNEL SOURCE:

ADD/DEL CH:

INPUT SELECT:

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 44 45

Comments to this Manuals

No comments

Dolby Laboratories HT2030 User's Guide Page 20

Comments to this Manuals

Related products and manuals for DVD players Dolby Laboratories HT2030