Dolby Laboratories CP650 User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
Dolby
®
CP650 Digital Cinema Processor User’s Manual Operating Instructions
2-11
Button 01 Format
> Format xx
format name
Button 01 Format
>Format 80
Master Digital In
Button U2 Format
>Format 65
Public Address LsRs
2.2.8 Assigning Front-Panel Buttons to Formats
Any available format can be assigned to the front-panel 01, 04, 11, U1, U2, or NS
buttons. When the button is pressed, that format will be selected.
1. Pressing steps through the button selections, 01, 04,
11, U1, U2, and NS.
2. Rotate the fader knob to select one of the many format
choices available. This example shows Format 80
assigned to Button 01.
3. Press OK to save the assignment to this button.
4. Press to step to the other button choices, then rotate the
fader knob again to select the desired format.
5. Press OK to save the assignment to this button, and so on.
6. Press the illuminated format button to return to normal CP650 operation.
2.2.9 The Mute Function
Use the mute function between intermission music and starting the projector to
prevent the audience from hearing annoying thumps and leader crackle at the
beginning of the show. This function is also useful if the film breaks or runs out while
the projector is active, since it suppresses the very loud signal that occurs when
leaders or tails pass through the projector.
When you press mute, the volume automatically fades all the way down on all
channels. The button will flash, indicating that the CP650 outputs are muted. When
you press the button again, or select a new format, the volume automatically rises to
the level set by the fader.
The fade-out and fade-in time can be set to work from 0.2 to 5 seconds by following
this procedure:
1. Press , or press and hold the button while rotating the
front-panel knob to move to the Mute Fade-in Time menu.
2. Set the desired fade-in time using the front-panel knob.
3. Press OK to save your setting.
4. Press to set the Mute Fade-out Time using the same procedure.
5. Press the illuminated format button to return to normal operation.
Mute Fade-in Time
>x.x Seconds
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Comments to this Manuals

No comments